Protecting The Software - HP xw4000 Service & Reference Manual

Setup Utilities and Diagnostic Features
Running Diagnostic Tests
If your version of Diagnostics for Windows includes diagnostic testing utilities, four tabs will
appear next to Overview: Test, Status, Log, and Error.
1. Select the Test tab.
2. Select one of the following options:
Quick Test—Runs a quick, general test on each device with a minimal number of
prompts.
Complete Test—Runs maximum testing of each device with minimal prompts.
Custom Test—Runs only the tests you select. To select specific devices or tests, find the
device in the list, then click the box beside each test to select or deselect it. When
selected, a red check mark appears in the box.
3. Select Interactive Mode or Unattended Mode.
4. In Interactive Mode, the diagnostic software will prompt you for input during tests that
require it. Some tests require interaction and will display errors or halt testing if selected in
conjunction with Unattended Mode.
5. Click the Begin Testing button.
6. Test Status is displayed, showing the progress and result of each test.
7. If errors are found, click the Error tab to display more detailed information and
recommended actions. By following the recommended actions, you may be able to solve
some problems yourself.
8. Click Print or Save the error information in case you need to contact your HP authorized
dealer, reseller, or service provider for assistance.
9. To exit Diagnostics for Windows, click File, then click Exit.

2.3 Protecting the Software

To protect software from loss or damage, you should keep a backup copy of all system software,
applications, and related files stored on the hard drive. The Restore CD or the Restore Plus! CD
that accompanies many desktop and workstation models enables the user to selectively restore
the original system software. You can order a replacement copy of the Restore CD from HP at
nominal cost for all of the software preinstalled on the computer. Refer to the operating system or
backup utility documentation for instructions on making backup copies of data files.
2–14 Service Reference Guide