Speaker - HP xw4000 Service & Reference Manual

10.5 Speaker

In hp workstation xw4000 models the speaker is mounted on the front of the chassis behind the
board guide. In hp workstation xw6000 models the speaker is mounted on the drive bay next to
the board guide. The speaker is held in place by screws that are removed from the inside of the
chassis. To remove the speaker use the following procedure:
1. Prepare the computer for disassembly.
2. Remove the access panel.
3. On hp workstation xw4000 models remove the board guide as described in section 9.4.
4. Disconnect the speaker wire 1 from the system board.
5. Remove the screws that secure the speaker to the chassis.
6. Remove the speaker.
hp workstation xw4000 speaker mounting
hp workstation xw6000 speaker mounting
To install the speaker, reverse the removal procedure.
Service Reference Guide
Removal and Replacement Procedures Chassis
10–7