2Agp Card With A Type 2 Retention Mechanism - HP xw4000 Service & Reference Manual

Removal and Replacement Procedures Expansion Cards and Memory
11.3.2 AGP Card with a Type 2 Retention Mechanism
To remove an remove an AGP card use the following procedure.
1. Prepare the computer for disassembly.
2. Remove the access panel.
3. Remove the screw at the top of the expansion slot.
4. Pull the arm on the right side of the retention mechanism.
5. Pull the card straight up to remove it from the expansion socket.
To install the graphics card, reverse the above procedures.
Some models may not require a retaining screw.
11–8 Service Reference Guide