Replacing The Storage Tray - HP Visualize c100 Install Manual

Hp visualize c100: install guide

Hide thumbs Also See for Visualize c100:

Replacing the Storage Tray

1 Slide the storage tray assembly into the system unit chassis, as shown in Figure 5.

Figure 7

2 Tighten the storage tray retaining screw, as shown in Figure 5.

3 Reconnect the power cords to the system unit, the monitor, and any peripherals.

4 Power on any peripherals, the monitor, and the system unit.

5 Pack the old disk interconnect board back in the antistatic bag and place it into

Retaining Screw

Installing the Storage Tray Assembly

Connect the power cords to the ac wall outlets.

the old box and use the documentation provided to return it to Hewlett Packard

for credit.

Table of Contents

Do you have a question about the Visualize c100 and is the answer not in the manual?