Replacing The Storage Tray - HP C160 Owner's Manual

Changing Your Workstation's Hardware Configuration
Installing Storage Devices

Replacing the Storage Tray

1 Slide the storage tray assembly into the system unit chassis, as shown in Figure
Figure 37
2 Tighten the storage tray retaining screw, as shown in Figure 37.
3 Reconnect the power cords to the system unit, the monitor, and any peripherals.
4 Power on any peripherals, the monitor, and the system unit.
118
37.
Retaining Screw
Installing the Storage Tray Assembly
Connect the power cords to the ac wall outlets.