Replacing The Power Supply - HP Vectra VL600 Supplementary Manual

WARNING
Hard drive(s)

Replacing the Power Supply

To avoid electric shock, do not open the power supply. There are no
user-serviceable parts inside.
1 Remove the computer's cover (described in this chapter).
2 Remove the airflow guide.
3 Remove all internal power supply connectors.
DVD, CD-RW,
CD-ROM drive(s)
2 How to Install and Replace Components In Your Desktop PC
Floppy drive
Replacing the Power Supply
Press firmly on the side as
shown until the airflow
guide comes free on one
side, then lift it out
Main power
(
located on system board near
memory modules)
71