Replacing The System Board - HP Vectra VL600 Supplementary Manual

2 How to Install and Replace Components In Your Desktop PC

Replacing the System Board

Replacing the System Board
1 Remove the computer's cover (described in this chapter).
2 Remove the main memory and processor from the old system board
(described in this chapter).
3 Remove all data and power cables from the old system board.
4 Remove the old system board by removing the screws that secure
the board in position and lifting it out of the PC.
5 Insert the new system board into the PC and fasten the screws to
secure the board in place.
6 Replace all components and any data and power cables in the new
system board (described in this chapter).
7 Replace the cover (described in this chapter).
70