Integrated Audio Connector
If you install an add-on sound
board, remove the cable in this
connector and insert it into the
sound board's connector.
NOTE
6 The accessory board may need a special connection, such as:
WOL (Wake on LAN) connector to the network card (not
•
necessary with PCI 2.2-compliant network cards).
CD-ROM drive to the sound board (if you no longer want to use
•
the integrated audio).
For more information, refer to the documentation that came with
the accessory board. The necessary cables are usually provided with
the accessory board.
If you install a network board and connect it to the WOL connector, you
must enable the
Suspend Wake-Up/Integrated Network
Integrated Network
program. This only applies if the network board supports these modes.
To enter the Setup program, press F2 during startup.
If you install an add-on sound board (and you no longer want to use the
integrated audio), you must set the
the
menu of the Setup program to
Advanced
7 Replace the cover (described in this chapter).
2 How to Install and Replace Components In Your Desktop PC
fields in the
menu of the PC's Setup
Power
Integrated Audio Interface
Installing Accessory Boards
WOL Connector
and/or
.
Disabled
in
65