Installing A Second Hard Disk Drive - HP Vectra VL600 Supplementary Manual

NOTE
CAUTION
4 Turn the drive tray over, remove all the screws from the base of the
tray, then slide out the old hard drive.
5 Slide the drive tray back into the bay until it clicks into place.
6 Attach the data and power connectors.
7 Replace the cover (described in this chapter).
8 Verify the new configuration by checking the HP Summary Screen.
To access the HP Summary Screen, press
appears during startup.
Ensure that you have installed all the required operating system and HP
drivers on the newly installed drive. To reinstall operating system and
HP drivers, use the Image Creation & Recovery CD-ROM provided
with the PC. In addition, you can find the most up-to-date versions of
HP drivers on HP's Web site at:

Installing a Second Hard Disk Drive

Handle the hard disk drive with care. Avoid shocks and violent
movement as this can cause damage to the hard disk drive's internal
components.
Make sure that you back up your files before you install a hard disk
drive. Refer to your operating system documentation for information on
how to do this.
1 Remove the computer's cover (described in this chapter).
3 How to Install and Replace Components In Your Minitower PC
www.hp.com/go/vectrasupport.
Upgrading Mass Storage Devices
when the Vectra logo
Esc
91