Removing and Replacing the Power Supply
32
Upgrading and Servicing Guide
7
Replace any cables that you removed.
8
If necessary, complete the procedure "Replacing a Graphics or Add-in Card" on
page 29.
9
Complete the procedures to replace the computer cover and close the computer. See
"Replacing the Computer Cover" on page 7.
NOTE: You may have to manually set the time and date on the computer after startup.
Your computer comes with a 460W or 700W power supply. You can replace the power
supply with an equivalent one.
1
Prepare the computer, and remove the computer cover. Complete the procedure
"Opening the Computer" on page 4.
2
Make note of all cables plugged into the power supply, and where they are connected
within the chassis, to ensure everything will be reconnected.
3
Methodically release the cables from the cable organizers.