Removing And Replacing The Power Supply; Removing The Power Supply - HP blackbird 002 Service Manual

Removing and Replacing the Power Supply

Removing the power supply

1 Prepare the computer to be opened, and then open the left access door, open and
remove the PCI door, remove the thermal divider, and remove the power supply
baffle. See "Opening and Closing the Computer" on page 1.
WARNING: Remove the power cord from the computer. Failure to do so before
removing the power supply can result in personal injury or equipment
damage.
2 Inside the chassis, note the location of each plug connected to the power supply and
label the cable. Press the latch (A) on each plug, and then pull the plug from the
connector.
WARNING: If you disconnect the power connector for the liquid cooling system,
ensure that it is reconnected prior to connecting power and turning on the
computer. Failure to do so may result in damage to the cooling system and to
the computer.
A
A
Upgrading and Servicing Guide
45