HP Vectra VL600 Supplementary Manual page 89

On selected models, an Ultra 2
16-bit SCSI cable with two
connectors.
There is one external connector
on the rear of the PC.
Before Installing a Hard
Drive
SCSI Models
Terminator
Refer to the drive's installation guide to see if you must set jumpers or if
there is a special installation procedure to follow. The cables provided
with your PC are cable select. This means that you do not need to
change the jumper settings on a hard drive if you set the drive to cable
select.
3 How to Install and Replace Components In Your Minitower PC
Upgrading Mass Storage Devices
89