Ruijie Networks RG-S7800C Series Quick Installation Manual page 20

RG-S7800C Switch Quick Installation Guide, V1.2
① Supervisor module slot
Note:
Figure 4-17 Slot Location on RG-S7805C
① Supervisor module slot
Note:

Install Modules
The supervisor module and service module adopt the design of self-locking lever. See figure 4-13 for operation.
(1) Lever Operation
Figure 4-18 Pulling out Lever
(2) Module Installation on RG-S7808C
1) Pull out both levers
2) Insert the module into the slot along the rail and drive it ahead smoothly
3) Push both levers toward the slot
4) Tighten captive screws on both sides of the panel
Figure 4-19 RG-S7808C in Chassis
(① in figure 4-19).
(③ in figure 4-19).
② Service module slot
② Service module slot
(② in figure
(④ in figure 4-19).
Installing the Switch
4-19).
17