Statistics - Altana BYK color2view Operating Instructions Manual

Benchtop spectrophotometer
Hide thumbs Also See for BYK color2view:
Table of Contents

Advertisement

BYK-Gardner GmbH
6.1.12

Statistics

Go to Measurement parameter > Statistics and select the statistic options to be used during
measurement: The number of measurements required on standard and on sample and statistic
data to be displayed.
You can also select the statistic data to be displayed:
·
Min: The minimum value for all measurements.
·
Max: The maximum value for all measurements.
·
Mean: The average value for all measurements.
The number of measurements required is visible in the measurements results in the upper right of
the screen, e.g. "2/3" means: 3 measurements are required and 2 measurements are already done.
The status indicator remains gray for "not complete".
If the no. of measurements is e.g. "3", the icon for Next becomes active after the 3
measurement. The status indicator lights up in green for "complete".
301 500 210 E 2207
color2view
rd
63

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BYK color2view and is the answer not in the manual?

This manual is also suitable for:

Byk color2view x7604

Table of Contents