Altana BYK color2view Operating Instructions Manual page 36

color2view
To add a new standard click on the Plus symbol (+); a new standard is created and the input for
the standard name appears.
Accept the default name or enter a desired name and click on the check mark in the upper right
corner. The instrument is now ready to measure the current standard.
Proceed with following steps:
1. Use the camera icon to switch the camera preview on or off.
2. Check the aperture currently selected in
3. Place standard on instrument.
4. Click on Measure or press the Operate button.
5. Standard is measured and automatically saved.
Now the measured sample exists as new digital standard in instrument memory.
36
Measurement Parameter
BYK-Gardner GmbH
54
.
301 500 210 E 2207