Default Values / Settings - Altana BYK color2view Operating Instructions Manual

color2view
3.6.2

Default Values / Settings

The instrument is working with default measurement parameters. Before you start measurements,
these parameters must be controlled and, if necessary, adjusted to individual specifications. For
more details see System Configuration
Traceable to
Select traceability mode: The measurement
results are in accordance with the calibration
traceable to the National Research of Canada
the predeccessor instrument color-view. Default
is NRC.
Aperture
Select aperture mounted on the instrument.
Default is 32 mm.
Color system
Select color system. Default is CIE L*a*b*.
Color equation
Select color equation. Default is ∆E*.
Color indices
Select color indices. Default is none.
Gloss
Turn gloss measurement on or off.
NOTICE
Changes in the measurement parameters apply to new standards only. Existing standards
with measurement data will be measured with previous parameter in order to ensure
data consistency.
26
53
> Measurement Parameter
Illumination
Select standard illuminant. Default is D65.
or
Observer
Select standard observer. Default is 10°.
Fluorescence
Activate these scales to predict color stability.
Default is ∆Fl.
Statistics
No. of readings to be taken per standard or per
sample. Statistics are evaluated, if n > 1.
Always use autostandard
Search for closest standard is always active.
Always continue last test series
No new test series is created; latest series is
opened automatically.
BYK-Gardner GmbH
54
.
301 500 210 E 2207