Traceability; Aperture - Altana BYK color2view Operating Instructions Manual

BYK-Gardner GmbH
6.1.1

Traceability

Here the measurement mode of the instrument is selected. This has impact on the results retrieved
during the measurements.
Following modes are supported:
·
Traceable to NRC: The measurement results are in accordance with the calibration
traceable to the
exchanged with instrumens of spectro2guide familiy.
·
Traceable to color-view: Select this mode if the measurement results should be
compared to the color-view, the predecessor of the color2view.
The measurement mode currently selected is shown in the main menu, see
6.1.2

Aperture

Select the measurement aperture installed on the instrument here. Default is 32 mm.
The current selection is shown in the main menu (see
screen (see Measurement Aperture
301 500 210 E 2207
National Research of Canada. In this mode, digital standards can be
30
).
25
Display Unit) and in the measurement
color2view
25
Display Unit .
55