Taping Heads - 3M -Matic 800a3 Instructions And Parts List

13-MAINTENANCE AND REPAIRS (continued)

13.11.2 Taping Heads

(Refer to Figure 13-8B and Figure 13-8C)
Taping Head Adjustments
•
To reduce the risk associated with sharp blade hazards:
−
Keep hands and fi ngers away from tape cutoff blades under orange blade guards. The blades are
extremely sharp
TAPE WEB ALIGNMENT – Manual 2
TAPE DRUM FRICTION BRAKE – Manual 2
APPLYING MECHANISM SPRING – Manual 2
ONE-WAY TENSION ROLLER – Manual 2
TAPE LEG LENGTH
Leading Tape Leg Length Adjustment – Manual 2
Changing Tape Leg Length from 70 to 48mm [2-3/4 to 2 inches] – Manual 2
Note – Changing tape leg to 48mm [2 inches] requires machine adjustment also. See
"Special Set-Up Procedure – Changing Tape Leg Length".
1. Loosen, but do not remove, the two (2) retaining screws that secure the upper taping head shown in Figure 13-8B.
Figure 13-8 – Removing Taping Heads From Case Sealer
800a3-NA
WARNING
B
A
30
C
2011 September