Performance Specifications - Mitsubishi Electric AJ65BT-D62 User Manual

3. SPECIFICATIONS

3.2 Performance Specifications

Counting speed setting switch
Number of channels
Count
input
signal
Counting speed
(max.)*
Counter
Minimum pulse width that
can be counted
Coinciden-
ce output
External
input
External
output
CC-Link station type
Number of stations occupied
Connection cable
Withstanding voltage
Insulation resistance
Noise immunity
Terminal block
Applicable cable size
Applicable crimping terminal
Module mounting screws
Applicable DIN rails
External power supply
Permissible instantaneous power fail-
ure time
Downloaded from ManualsNet.com
The following table gives the performance specifications of the high-speed counter
module.
(1) Performance specifications of the AJ65BT-D62
Item
Phase
Signal level
( A, B)
1-phase
input
2-phase
input
Counting range
Type
Adjust rise/fall time of
input to 2.5µs or less.
Duty ratio: 50%
Comparison range
Comparison result
Preset
Function start
Response time
Coincidence output
Response time
500VAC for 1 minute across all DC external terminals and grounding terminal.
10M
a 500VDC insulation resistance tester.
Measure using a noise simulator of noise voltage 500Vp-p, noise width 1µs
and noise frequency 25 to 60Hz.
Weight
search engine
HIGH position
1-phase input, 2-phase input
200kPPS
200kPPS
24-bit binary, 0 to 16777215
UP/DOWN preset counter and ring counter functions
5µs
2.5µs 2.5µs
(1, 2-phase input)
Set value < count value, set value = count value, set value > count value
5/12/24VDC, 2 to 5mA
OFF ON 0.5ms or less
ON OFF 3ms or less
Remote device station
Dedicated cable for CC-Link
or more across all DC external terminals and grounding terminal using
27-pin terminal block (M3.5×7 screws)
0.75 to 2.00mm
RAV1.25-3, RAV2-3.5 (conforming to JIS C2805)
Screws of M4×0.7mm(0.03inch)×16mm(0.63inch) or larger
(tightening torque range: 0.78 to 1.18N･m)
DIN rail may also be used for mounting.
TH35-7.5Fe, TH35-7.5Al, (conforming to JIS C2812)
Current consumption: 70 mA (for 24VDC)
3 - 2
Specifications
LOW position
2 channels
5VDC
12VDC 2 to 5mA
24VDC
10kPPS
7kPPS
100µs
50 50
µs µs
(1-phase input) (2-phase input)
24-bit binary
2A/1 common
0.1ms or less
4 stations
2
18 to 28.8VDC
1ms
0.41kg(0.91lb)
MELSEC-A
142µs
71 71
µs µs