Mitsubishi Electric AJ65BT-D62 User Manual page 5

[Wiring Precautions]
 Always secure the wires or cables connected to the module, e.g. run them in conduits or clamp
them.
Otherwise, the module or cables can be damaged due to dangling, moved or accidentally pulled
cables or misoperation can occur due to improper cable connection.
 Do not install the control lines or communication cables together with the main circuit lines or
power cables.
Failure to do so may result in malfunction due to noise.
 Do not hold the cable part when unplugging the communication or power cable connected to the
module.
When the cable is fitted with a connector, hold the connector of the cable part connected to the
module.
When the cable is not fitted with a connector, loosen the screw in the cable part connected to
the module. If you pull the cable connected to the module, the module or cable can be damaged
or misoperation can occur due to improper cable connection.
[Starting and Maintenance Precautions]
 Do not touch the terminals while power is on.
This can cause misoperation.
 Before starting cleaning or terminal screw retightening, always switch power off externally in all
phases.
Otherwise, a module failure or misoperation can occur.
Downloaded from ManualsNet.com search engine
CAUTION
WARNING
A - 3