Table of Contents
Advertisement
10. PROGRAMMING
Current value reading
Current value
reading
Latch count value reading
Latch counter command
Execution of latch counter
Execution of latch counter
Pulse count stop
Stop of counting
Remote output signal write
Downloaded from
ManualsNet.com
search engine
10 - 51
MELSEC-A
CH.1 current value
(RWr0, RWr1) is read.
CH.1 latch count value
(RWr2, RWr3) is read.
CH.1 counter function
selection start command
(RY16) is ON.
CH.1 counter function
selection start command
(RY16) is OFF.
CH.1 count enable
(RY14) is OFF.
RY00 to RY7F is written
to Y400 to Y47F.
Advertisement
Table of Contents
