Program Example Of Sampling Counter Function - Mitsubishi Electric AJ65BT-D62 User Manual

10. PROGRAMMING

10.5.7 Program example of sampling counter function

Network parameter settings with dedicated command RLPA
Automatic refresh parameter settings with dedicated command RRPA
Downloaded from ManualsNet.com search engine
10 - 36
MELSEC-A
Synchronous mode is
invalid.
No. of modules
connected: 1
Station information of
high-speed counter module
(remote device station, 4
stations occupied, station
number 1)
Dedicated command
(RLPA)
Head I/O number of
master module
Parameter storage
head device
Device that turns on 1
scan at completion
Parameter status
reading at abnormal
completion
RX head number is set.
"X" is set.
X400 is set.
128 points is set.
RY head number is set.
"Y" is set.
Y400 is set.
128 points is set.
RW head number is set.
"D" is set.
D200 is set.
263 points is set.
SB head number is set.
"B" is set.
B0 is set.
512 points is set.