ADEMCO VISTA-10SE Installation Instructions Manual page 81

REMOTE KEYPAD
REMOTE KEYPAD
REMOTE KEYPAD
REMOTE KEYPADS
4281L, 4281M, 4281H
RF RECEIVERS
(5700 System)
5881L, 5881M, 5881H
RF RECEIVERS
(5800 System)
TRANSMITTER
used with 5827BD
Wireless 2-Way Keypad
RELAY MODULE
PHONE MODULE
7720PLUS/7820
www.PDF-Zoo.com
6127 1. Physical:
2. Electrical:
3. Interface Wiring: Same as 4127.
6128 1. Physical:
2. Electrical:
3. Interface Wiring: Same as 4127.
6137 1. Physical:
2. Electrical:
3. Interface Wiring: Same as 4127.
6138 & 6139 1. Physical:
2. Electrical:
3. Interface Wiring: Same as 4127.
1. Physical:
2. Electrical:
and
3. Interface Wiring: Same as 4127.
4. Range:
5. Zones:
5800TM 1. Physical:
2. Electrical:
MODULE
3. Interface Wiring: Same as 4127.
4204 1. Physical:
2. Electrical:
3. Interface Wiring: Same as 4127.
4. Four Output Relays:
4285 1. Physical:
2. Electrical:
3. Device Address: Permanently set to address 4.
4. Interface Wiring: See 4285 PHONE MODULE section.
5. Telephone Line Connections: See 4285 PHONE MODULE section.
1. Physical:
2. Electrical: Voltage Input: 12VDC; Current Drain: 150mA.
3. Device Address: Set to address 3.
4. Interface Wiring: Same as 4127 above.
firealarmresources.com
5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm).
Voltage Input: 12VDC; Current Drain: 20mA.
5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm).
Voltage Input: 12VDC; Current Drain: 30mA.
6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).
Voltage Input: 12VDC; Current Drain: 85mA.
6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).
Voltage Input: 12VDC; Current Drain: 100mA.
7-3/8" (188mm) W x 4-3/8" (112mm) H x 1-7/16" (37mm) D.
Note: 10-7/8" (277mm) H with antenna.
Voltage Input: 12VDC; Current Drain: 35mA.
200ft (60m) nominal indoors from wireless transmitters (the
actual range to be determined with system in TEST mode).
(With the Ademco VISTA–10SE )
4281L (4281CN-L*): accepts up to 4 transmitters.
4281M/ 4281H (4281CN-H*): accepts up to 8 transmitters.
5881L (5882L*): accepts up to 8 transmitters.
5881M/5881H (5882H*): accepts up to 16 transmitters.
*
Used in Canada
2-1/4" W x 4-1/8" H x 7/8" D (57mm x 105mm x 22mm).
Voltage Input: 12VDC; Current Drain: 20mA.
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).
Voltage Input: 12VDC; Current Drain: 15mA (Relays off).
SPDT Contacts.
Rating:
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).
Voltage Input: 12VDC; Current Drain: 160mA.
8-1/2" W x 9-1/2" H x 1-3/4" D (216mm x 242mm x 45mm).
– 81 –
180mA (Relays on).
2A max at 28VDC/AC.