User Dip Switches (Active High); User Push Buttons (Active High) - Xilinx ML628 User Manual

Table 1-13: User LEDs

User DIP Switches (Active High)

[Figure
The DIP switch SW7 provides a set of eight active-High switches that are connected to user
I/O pins on the FPGA as shown in
any other purpose determined by the user.
Table 1-14: User DIP Switches

User Push Buttons (Active High)

[Figure
SW5 and SW6 are active-High user push buttons that are connected to user I/O pins on the
FPGA as shown in
the user.
ML628 Board User Guide
UG771 (v1.0.1) June 28, 2011
FPGA Pin Net Name
N28 APP_LED1
P28 APP_LED2
K28 APP_LED3
L27 APP_LED4
K27 APP_LED5
K26 APP_LED6
P26 APP_LED7
R26 APP_LED8
1-2, callout 15]
FPGA Pin Net Name
J29 USER_SW1
J28 USER_SW2
R27 USER_SW3
T27 USER_SW4
H29 USER_SW5
H28 USER_SW6
L29 USER_SW7
L28 USER_SW8
1-2, callout 16]
Table 1-15. These switches can be used for any purpose determined by
www.xilinx.com
Reference
Designator
DS17
DS16
DS15
DS14
DS13
DS12
DS11
DS10
Table 1-14. These pins can be used to set control pins or
Reference
Designator
SW7
Detailed Description
23