Chain Port Signal Leads; Chain Port Tx Bytes; Chain Port Rx Bytes; Chain Port Overrun Errs - ADTRAN ATLAS 800 User Manual

Chapter 6. Terminal Menu and System Control
»» Configuration
» Chain Port Signal
Leads
» Chain Port Tx
Bytes
» Chain Port Rx
Bytes
» Chain Port
Overrun Errs
» Chain Port
Framing Errs
» Clear Chain Port
Countrs
SYSTEM
>
CONFIG
6-6
0 (zero) available Provides a count of the number of times the quantity
of available resources reached 0.
Hour Data
Shows availability information by hour for a 24-hour
period.
Reset
Activates the reset of all accumulated availability sta-
tistics.
Write security: 4; Read security: 5
Configures the statistics displayed under data tables.
Display Formt
Selects the statistics display format—Raw Data or %.
Reset Mode Selects the mode for resetting statistics—Manual, Dai-
ly, or Weekly.
Read security: 5
Displays the state of the following options (these fields are read-only). An
asterisk (*) indicates activity for the item.
RTS Request to send.
CTS Clear to send.
DTR Data terminal ready.
DCD
Data carrier detect.
Read security: 5
Displays the number of transmitted data bytes.
Read security: 5
Displays the number of received data bytes.
Read security: 5
Displays the number of overrun errors.
Read security: 5
Displays the number of received framing errors.
Clears all chain port counters. Press Y to activate command.
The System Config menu allows you to set up the ATLAS operational con-
figuration. Figure 6-3 shows the items included in this menu.
ATLAS 800 User Manual 61200180L1-1