Configuring The Ports For Example 2; Figure 8-4. Slot 0 Module Configuration Menu - ADTRAN ATLAS 800 User Manual

T1: Controller T1
Voice A Slot 0/Port 1
T1: Controller T1
Voice B Slot 0/Port 2
T1: Quad T1/PRI
Voice C Slot 1/Port 1

Configuring the Ports for Example 2

61200180L1-1
1-8
RBS On
1-8
RBS On
1-8
RBS On
Begin by navigating to Terminal Menu/Modules . From this menu, configure
the various ports to match the framing parameters of the T1 line provided
by the telco.
Instructions for Configuring the Ports
Step
1 Select Slt / 0 (system controller T1/PRI port).
Set the line framing parameters by selecting Menu /
2
Configuration / Frame / ESF .
Copy this configuration information for use with additional ports.
3
(Navigate to Prt and press C .)
Navigate to the port index number of the second port ( Prt ) and
4 press P to paste the configuration information. Press Y to confirm
paste.
5
Repeat Step 4 for the first port of the T1/PRI card located in Slot 1.
Navigate to the V.35 port Configuration submenu and repeat
6
Step 2 for the first port, followed by a copy-and-paste to the
second and third ports (see Figure 8-4).
ATLAS 800 User Manual
Chapter 8. Dedicated Maps Terminal Menu
Table 8-1. Connections (Continued)and Ports
T1-D Quad T1/PRI DSX
Slot 1/Port 2
T1-D Quad T1/PRI DSX
Slot 1/Port 2
T1-D Quad/PRI DSX
Slot 1/Port 2
Action

Figure 8-4. Slot 0 Module Configuration Menu

1-8
RBS On
9-16
RBS On
17-24
RBS On
8-7