STATUS
>
» S0 System
»» Ethernet Status
»» Chain Port Status
» S1—S8
CONFIG
>
» S0 System
61200180L1-1
To help you follow the terminal menu hierarchy, the following notations are used.
MENUS
>
» Submenus
»» Sub-submenus
The Status menu branch lets you view the status of the ATLAS_800 Base
Unit and any installed modules.
Displays status options that are available for the ATLAS_800 Base Unit.
Choose from Ethernet (see Ethernet Status on page 4-7) or Chain Port (see
Chain Port Status on page 4-7).
Shows the status of the 10BaseT Ethernet connection port. The following
port status options display in the LCD window. An asterisk (*) indicates ac-
tivity for the item.
TX
Data is being transmitted from the 10BaseT port on the system con-
troller.
RX
Data is being received on the 10BaseT port.
LNK
The current status of the 10BaseT link integrity test is indicated
(LNK should always be on when the unit is connected to a function-
al 10BaseT hub).
Indicates the status of the Chain Port. The following port status options dis-
play in the LCD window. An asterisk (*) indicates activity for the item.
(Read-only.)
RTS
Request to send.
CTS
Clear To send.
DTR
Data terminal ready.
DCD
Data carrier detect.
Displays the current status of installed modules. S1 corresponds to slot 1, S2
to slot 2, and so on. When you select one of these options, an expanded de-
scription of the card status displays. The status types include ON (Online),
OFF (Offline), NRSP (No Response), NRDY (Not Ready), and RST (Restart-
ing).
The Config (Configuration) menu branch provides limited configuration
control of the ATLAS_800.
Displays configuration options that are available for the ATLAS_800 Base
Unit. Choose from Ethernet Configuration (see Ethernet on page 4-8) or
Chain Port Configuration (see Chain Port on page 4-8).
ATLAS 800 User Manual
Chapter 4. Using the Front Panel
4-7