ADTRAN ATLAS 800 User Manual page 4

FCC regulations require that in this manual the following information be provided to the
customer:
1. This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom
of the chassis.
2. An FCC-compliant telephone cord and modular plug is provided with this equipment. This equip-
ment is designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68-compliant. See Chapter 2, Installing the ATLAS 800, for details.
3. If your telephone equipment (ATLAS) causes harm to the telephone network, the telephone com-
pany may discontinue your service temporarily. If possible, they will notify you in advance. But
if advance notice isn't practical, you will be notified as soon as possible. You will be advised of your
right to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance
notice to give you an opportunity to maintain uninterrupted service.
5. If you experience trouble with this equipment (ATLAS), please contact ADTRAN at (256) 963-8000
for repair/ warranty information. The telephone company may ask you to disconnect this equip-
ment from the network until the problem has been corrected or until you are sure the equipment is
not malfunctioning.
6. This unit contains no user-serviceable parts.
7. The following information may be required when applying to your local telephone company for
leased line facilities.
Service Type
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
ISDN
iv
REN/SOC FIC
6.0N 04DU9-BN
6.0N 04DU9-DN
6.0N 04DU9-1KN
6.0N 04DU9-1SN
6.0N 04DU9-ISN
USOC
RJ-48C
RJ-48C
RJ-48C
RJ-48C
RJ-48C