Chapter 12. ADTRAN Utilities
12-10
Microsoft Windows. The configuration of an ATLAS 800 can be saved offline
as a backup file. The saved file may also be used to send the same configu-
ration to multiple ATLAS 800 units. Transfer configuration files using the
TFTP protocol (a TCP/IP user protocol) via the 10BaseT Ethernet port. The
ATLAS 800 must have a valid IP address, subnet mask, and default gateway
(if required), and be connected to an Ethernet network before proceeding.
Figure 12-6 shows the TFTP server interface.
Files must be placed in the Application directory where you
installed the product. Received files are also placed here.
Only one configuration transfer session (upload or download) may be active
at a time. The TCP/IP parameters are not saved or overwritten as part of an
ATLAS 800 unit's transferred configuration to allow sending identical con-
figurations to multiple units. When you start this program, a port is auto-
matically opened.
ATLAS 800 User Manual
Server
TFTP Server
Print Log
Help
Figure 12-5. TFTP Server Interface Menu Tree
Figure 12-6. TFTP Server Interface
Enable
Disable
Abort
Exit
...to Clipboard
...to Printer
Clear Log
Contents
About
61200180L1-1