Chain Port Output
Software Management
Front Panel
T-Watch Pro Management Software Program
1202060L2-1
Features of the chain port output include:
•
EIA-232 output to chain control to other TSU LTs
•
Up to 9600 baud operation
•
Automatic setup; no user input required
The front panel provides complete and easy control of all
items that can be configured through menu-guided options.
The front panel LCD also displays the status of operation and
performance reports for the unit. A complete discussion of
the operation of the front panel is found in Chapter 3,
Operation on page 3-1. The menu options are found in
Chapters 4 through 7.
T-Watch Pro is the ADTRAN management software program
that allows the user to control the TSU LT from a PC. It
provides complete control over the configuration of the TSU
LT using a graphic interface. The T-Watch Pro program
displays the same status and performance data as the front
panel LCD. This data is displayed as tables and graphs.
The T-Watch Pro program has the following capabilities:
•
Interfaces with a modem which permits dialing into a re-
mote TSU LT location to configure the unit or read the
unit's status or performance.
•
The performance data read from the units can be exported
in a file which is compatible with common spread sheet
programs.
TSU LT User Manual
Chapter 1. Introduction
1-7