Table of Contents
Advertisement
Chapter 2: Installing the Wireless Access Point
Installing an Anti-theft Device
56
Installation of an anti-theft cable/lock is optional. The access point has a
lock port that is compatible with a Kensington lock. The lock port can be
used to physically secure the device to a table, wall, or a ceiling.
Note
Anti-theft devices are not available from Allied Telesis.
1. Follow the instructions provided with the vendor's anti-theft device for
the installation. See Figure 29 for the Kensington lock port location.
Kensington
Lock Port
Figure 29. Kensington Lock Port Location
2. If you are installing the wireless access point on a wall or ceiling and
have not installed in on the mounting bracket yet, go to "Attaching the
Access Point to the Mounting Bracket" on page 53.
Advertisement
Table of Contents
