Tq6000 Gen2 Models; Table 2. Differences Between The Tq6000 Gen2 Access Points - Allied Telesis TQ6000 GEN2 Installation Manual

TQ6000 GEN2 Models

Table 2. Differences Between the TQ6000 GEN2 Access Points

Model
Maximum number of access
points managed by AWC
Maximum number of wireless
client
MIMO
AWC-CB Access points
per Channel
Blanket VAP
Blankets per
access point
Communicating
clients at one
time per Channel
Blanket
Client sessions
at one time per
Channel Blanket
AWC-SC Links per access
point
Hops per access
point
Access points
per mesh group
Link rate (2.4GHz)
Link rate (5GHz)
The Table 2 lists the basic differences among four models..
TQ6602
GEN2
More than 100
200 clients per radio in
standalone mode
500 clients per Channel
Blanket
2.4GHz: 4x4
5GHz: 4x4
2,000
32
16 blankets per radio
2,000
10,000
4
8
21,844
2,402Mbps
(4x4)
TQ6000 GEN2 Access Points Installation Guide
TQ6702 TQm6602
GEN2 GEN2
Less than 100
127 clients per radio in
standalone mode
2.4GHz: 4x4 2.4GHz: 4x4
5GHz: 8x8 5GHz: 4x4
AWC-CB is not supported
Supported terminator access
points only
1,147Mbps (4x4)
4,804Mbps 2,402Mbps
(8x8) (4x4)
TQm6702
GEN2
2.4GHz: 4x4
5GHz: 8x8
4,804Mbps
(8x8)
23