Warning
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
Note
The access point must be powered by:
1. A UL listed external AC/DC power supply suitable for use at
o
Tma 50
C, a maximum operating altitude of 3000 m or higher, and
whose output meets separated extra-low voltage (SELV), limited
power sources (LPSs) and is rated 12 VDC, 4.0 A,
OR
2. By Power over Ethernet through a UL listed ITE. Refer to
Table 6, "External AC/DC Adapter Specifications" on page 60.
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.
Warning
An operational unit can be hot. Exercise caution when handling with
unprotected hands.
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 50°C (122° F)
Warning
To reduce the risk of electric shock, the PoE port on this product
must not connect to cabling that is routed outside the building where
this device is located.
Warning
This equipment is intended for indoor use only.
TQ6000 GEN2 Access Points Installation Guide
E80
E6
E7.
E40
E95
37