Racelogic Performance Box Touch V2 Quick Start Manual page 9

Hide thumbs Also See for Performance Box Touch V2:

Table of Contents

When you press the button, the unit will make an audible sound and you will see a 'PLEASE WAIT' message

counting down from 3. Until the satellite lock has been acquired, the number of satellites will be displayed as '00' and

the GPS status will show 'SEARCHING FOR SATELLITES'. It will take approximately 25 to 30 seconds for the unit

to reacquire the satellite lock.

You can access the Settings menu on Performance Box Touch by selecting the

Settings

button on the

bottom left of the screen when in a mode. You will see a Select Settings Screen with 4 Settings

options:

Mode

settings,

General

Settings,

Time settings

and

Diagnostic

settings.

You can change the settings by pressing the corresponding button next to an option.

To return to the Select Settings Screen, press the Exit button at the bottom left. Pressing it again in the

Select Settings Screen will return you to the main screen.

Table of Contents

Need help?

Do you have a question about the Performance Box Touch V2 and is the answer not in the manual?

Rlpbt-v2