Racelogic Performance Box Touch V2 Quick Start Manual page 13

screen.
• Right-hand side: This contains results from the defined acceleration test ranges, either as time, distance, or
speed. These values will start to populate once the start condition of the test is met. When the end condition is
met, they will remain on screen until the start condition is met again. Along with pressing the
you can also define Accel tests by double-tapping on an existing test range header or result.
You can reset tests by pressing the Reset button at the bottom of the screen.
Accel - Best Result Screen
This screen displays the best test information for all the ranges. If you have enabled One Foot Rollout or Slope
Correction in the Accel Settings, the test header text will reflect the selected options.
The screen is split into 2 halves:
• Left-hand side: This includes the maximum acceleration achieved (Peak G) and maximum speed achieved
(Vmax) since reset. You can reset these values by pressing the
• Right-hand side: This contains the best results from the defined acceleration test ranges, either as time,
distance, or speed. You can reset these values by pressing the Reset button at the bottom of the screen.
Selecting Accel Tests
You can define Accel Tests by pressing the
option. You can define 4 concurrent tests. These are by default: 0–60, 0–100, 0–100–0 and 0–¼ mile.
Settings button at the bottom left of the screen and selecting the Accel
Reset button at the bottom of the screen.
Settings button,
13