Save Results - Racelogic Performance Box Touch V2 Quick Start Manual

• Time of first completed run in session
• Date of first completed run in session
• Test run number
• Test completion time
• Test completion distance (km/h or mph)
• Maximum Speed (km/h or mph)
• Maximum acceleration achieved during a test run (g)
• Altitude difference between the start of test and end of the test (m or ft)
You can take a screenshot of the test history by pressing the
Return to the main screen by selecting the Exit button on the bottom left.
IMPORTANT
Performance Box Touch can display a maximum of 127 tests in chronological order. However, if you have
completed more tests they will still be recorded on the SD card. Once you have reached the 127-test limit,
you will see a brief warning message advising you that further tests will not be saved to the Test History.
This message will show again if you power-cycle the unit. A 'TEST HISTORY FULL' notification will also
be displayed beneath the Live Speed display. To view new test history results, you must first press the
Reset Button.

Save Results

You can also save the results as a .txt or .csv file (depending on the
by pressing the Save button at the bottom of the screen. When pressed, the unit will emit an audible
confirmation notification. If the results have been saved unsuccessfully, for example, no SD card is
inserted or the card is full, the button will flash 3 times and Performance Box Touch will emit an audible
error notification.
If saved successfully, the file name will include the test type, the date, and the time from the first
completed run in that session. Along with the
also includes average acceleration information, as well as the latitude and longitude position (in degrees
and decimal degrees format) added to the session header.
Screenshot
option
test history information
button.
selected) to the SD card
described above, the results file
20