Racelogic Performance Box Touch V2 Quick Start Manual page 23

IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch V2 unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format
supported by Performance Box Touch V2.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats
Performance Box Touch V2. Please reformat as per the instructions below.
You can read more about the different types of SD Cards and how you can make them work with your Performance Box
Touch here.
Logged Channels
Performance Box Touch logs channels to a
• Satellites: This is the number of satellites in use.
• Time: This is UTC time since midnight in the form HHMMSS.SS.
• Latitude: Latitude in minutes MMMM.MMMMMMMM +ve = North e.g. 3169.30644410M = 52D, 49M, 18.4S.
• Longitude: Longitude in minutes MMMMM.MMMMMMMM +ve = West e.g. 00040.18164742M = 00D, 40M,
10.9S.
• Velocity: Velocity in km/h.
• Heading: Heading in degrees with respect to North.
• Height: Height above sea level in meters based on the
• Vertical velocity: Vertical velocity in km/h. +ve velocity uphill, -ve velocity downhill.
• Long accel: Longitudinal acceleration in g, +ve for forward acceleration.
• Lat accel: Lateral acceleration in g, +ve for acceleration to the left.
• Solution type: Indicator for what the unit is currently using to derive position: 0 = No sats; 1 = Standalone
using GNSS only; 2 = SBAS.
You can find more information on the VBO file format here.
.vbo file on an inserted SD card. The channel information is as follows:
model of the earth
is
are not supported
used by thye VBOX GNSS engines.
by
23