Introduction - NexxTech 49110000 Owner's Manual

Introduction

The Nexxtech TM Wireless Home Security System includes a Main Console with an
automatic dialer that calls neighbors or friends in the event of a break in. Two battery
powered Wireless Door/Window Sensors are included to trigger the alarm when a door or
window is opened. A battery powered RF Motion Detector is also included to protect an
indoor area (batteries are not included). The Keychain Remote Control is used for arming
and disarming the system. It can also turn lights on and off (requires Nexxtech
Automation Modules). All sensors and remotes incorporate random digital security coding.
The system may be configured with any combination of the following items:
• Up to 16 Keychain Security Remotes with arm/disarm and panic functions, and buttons
to control security lights in and around the home.
• Up to 30* magnetic switch operated Wireless Door/Window Sensors.
• Up to 30* Wireless Motion Detectors.
• Additional Home Automation modules such as plug-in lamp and appliance modules and
wired-in replacement wall switches can be added to the system to flash lights on and off
when the alarm trips.
*Note: Door/Window Sensors and Motion Detectors may be added in any
combination up to a total of 30, e.g., 15 Door/Window Sensors and 15 Motion
Detectors, or any combination up to a total of 30. There are also 2 hard wired inputs,
which are zones 31 and 32.
Additional accessories available are shown below.
Door/Window Sensor
4911001
Keyfob Remote
4911002
4
TM Home
Motion Detector
4911003