Replacing Timers - NexxTech 49110000 Owner's Manual

Installation
You can review your stored timers by pressing the up or down Menu buttons. This will
show the stored timers in the form below
12ON 12:34am
OFF 12:45pm
While a timer is on the display, press Clear to delete it. You will first be asked: CLEAR
TIMER 1. YES 2. NO .
Press 1 (for YES) to delete the timer. This will take you to NEW TIMER to allow you to
enter a new timer. Press 2 to take you to NEW TIMER without deleting the one on the
screen. Press Clear to back out of the Menus.

Replacing Timers

You can review your timers by pressing the up or down Menu buttons. This will show the
stored timers in the form below
12ON 12:34am
OFF 12:45pm
While a timer is on the display, press OK to take you to the Replace Timer screen below.
Select 1 for YES, this takes you to the UNIT NUMBER screen below where you can
continue to enter a new timer as described on page 29. Select 2 for NO to take you to the
NEW TIMER screen so you can enter a new timer without replacing the existing one. Press
Clear to back out of the menus.
Note you can also clear ALL timers as described on page 25.
Armed
9. CLEAR TIMER
1. YES 2. NO
Power
Battery
Armed
9. REPLACE TIMR
1. YES 2. NO
Power Battery
Armed
9. UNIT NUMBER
Power
Battery
31
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away