Setting Options - NexxTech 49110000 Owner's Manual

Installation

Setting Options

Press either of the Menu up/down buttons. The display then shows ENTER PIN
(Personal Identification Number) in the top line.
The default PIN is 0000, press 0000 on the keypad. This clears the top line and shows * for
each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The
display looks like this:
Press an up or down menu button until you reach the OPTIONS menu, and then press OK
to go to the screen below (or press 7 to go into the OPTIONS menu ):
Press an up or down Menu button to select the desired sub-menu:
CHIME
SIREN
HOUSECODE
LIGHTCODE
Select the desired sub-menu item and then press OK. Press 1 or 2 in CHIME and SIREN
sub-menus. Select the desired Housecode letter, or desired Security Light Code, using
the up/down buttons. Press OK. Press Clear to back out of the menu. You are asked to
confirm, 1. YES, 2 NO. Press 1 to take you back to the HOME CONTROL screen. Press 2
to stay in INSTALL mode.
Armed
ENTER PIN
12:00 am
Power
Battery
Armed
****
12:00 am
Power
Battery
Armed
1. INSTALL
Power
Battery
Armed
7. OPTIONS
Power
Battery
1. CHIME ON
2. CHIME OFF (No chimes when doors/windows are opened)
1. SIREN ON
2. SIREN OFF (Silent Alarm)
(Chosen by Menu up/down buttons)
(Chosen by Menu up/down buttons)
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
26