Hard-Wired Inputs - NexxTech 49110000 Owner's Manual

Installation

Hard-Wired Inputs

You can also connect two hard-wired magnetic contact switches to the console.
These will be zones 31 and 32.
You can install a total of 30 additional zones, which can be a combination of Door/Window
Sensors and Motion Detectors. So, for example, you could have 15 Door/Window Sensors,
15 Motion Detectors, and 2 hard-wired zones. The hard wired zones are treated as delayed
zones (i.e. they have exit and entry delays if you arm the system in the Away mode).
Remove shorting link
before installing hard
wired magnetic contacts.
PRESS THEN ENTER YOUR PIN. THEN USE
TO STEP THRU MENU ITEMS. THEN PRESS OK
TO SELECT ITEM. OR PRESS NUMBERS BELOW.
1. INSTALL - Install Sensors & Remotes
- Enter time of day
2. SET C LOC K
- Store up to 6 phone numbers
3. PHONE NUMS
4. MESSAG E - Record or Replay your message
5. NEW PIN - Change your 4 Digit P.I.N.
- Sensor, Remote, Timer, Master
6. MEMORY
C LEAR
7. OPTIONS - Chime, Siren, H Code, L Code
8. DELAYS - Entry, Exit, Dial, Answer delays
- Set ON/OFF Timers
9. SET TIMER
CLEAR GIVES OPTION TO LEAVE MENU
Magnetic Switch
Contacts sold
separately
PRESS THEN ENTER YOUR PIN. THEN USE
TO STEP THRU MENU ITEMS. THEN PRESS OK
TO SELECT ITEM. OR PRESS NUMBERS BELOW.
- Install Sensors & Remotes
1. INSTALL
- Enter time of day
2. SET C LOC K
- Store up to 6 phone numbers
3. PHONE NUMS
- Record or Replay your message
4. MESSAG E
- Change your 4 Digit P.I.N.
5. NEW PIN
- Sensor, Remote, Timer, Master
6. MEMORY
C LEAR
- Chime, Siren, H Code, L Code
7. OPTIONS
- Entry, Exit, Dial, Answer delays
8. DELAYS
- Set ON/OFF Timers
9. SET TIMER
CLEAR GIVES OPTION TO LEAVE MENU
19