Important! Please read this booklet carefully before installing or using these units. WARNING - These units should ONLY be opened by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, end-users and service technicians should follow all safety procedures outlined in this manual.
Basic Camera to 14” CRT Monitor installation 1. Unpack all parts from the packing box. 2. Install or mount the camera at the desired location. Do not place the camera directly into sunlight or high light. 3. Lead the DIN cord back to your television or monitor. NOTE: 1.
Steps 1. Press “QUAD” button, it will display QUAD picture 2. Press down “AUTO-SCAN” button, the 4 images from Camera 1-4 including “QUAD” image will be automatically switched at rate of 4 sec one by one. 3. Press Camera 1-4 button, it will display corresponding full screen picture diagram of the selected camera.
Installing and Connecting the Devices Select a suitable installation site from which you want to monitor the desired location. A suitable installation site must have the following features: • Location must be located in a dry place • As dust free as possible •...
Specifications Camera 14” Monitor Operating Voltage 18 V DC Tube 35cm, 14” diagonal B/W tube, 90˚ deflection Picture Element 5100 x 490 (NTSC) 628 x 562 (PAL) Brightness 0 Lux Video Output Level 1 Vp-p / 75 Ohm Video Input 1) 4 channel DIN looping input Composite video signal 1.0 Vp-p 74 Ohm or HI-Z...
Page 7
Who is Providing This Warranty? • Orbyx Electronics, LLC (“Orbyx”), as the distributor of this Nexxtech product (your “Product”). What Does This Warranty Cover? • This warranty covers defects in materials or workmanship in your Product under normal use and conditions.