Setting Delays - NexxTech 49110000 Owner's Manual

Installation

Setting Delays

Press either of the Menu up/down buttons. The display then shows ENTER PIN
(Personal Identification Number) in the top line.
The default PIN is 0000, press 0000 on the keypad. This clears the top line and shows *
for each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The
display looks like this:
Press an up or down menu button until you reach the DELAYS menu, and then press OK
to go to the screen below (or press 8 to go into the DELAYS menu ):
Press the up or down Menu button to select the desired sub-menu:
ENTRY DELAY
EXIT DELAY
DIAL DELAY
ANSWER DELAY
Select the desired sub-menu item and then press OK. Then enter the desired delay time in
seconds up to 99. Press OK.
Press Clear to back out of the menu. You are asked to confirm, 1. YES, 2 NO. Press
1 to take you back to the HOME CONTROL screen. Press 2 to stay in INSTALL mode.
Pressing Clear while entering a number (for a delay time) just clears the numbers.
Armed
ENTER PIN
12:00 am
Power
Battery
Armed
****
12:00 am
Power Battery
Armed
1. INSTALL
Power
Battery
Armed
8. DELAYS
Power Battery
(Default 30 seconds)
(Default 60 seconds)
(Default 5 seconds)
(Default 30 seconds)
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
27