Clearing The Memory - NexxTech 49110000 Owner's Manual

Installation

Clearing the Memory

Press either of the Menu up/down buttons. The display then shows ENTER PIN
(Personal Identification Number) in the top line.
The default PIN is 0000, press 0000 on the keypad. This clears the top line and shows *
for each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The
display looks like this:
Press an up or down menu button until you reach the MEMORY CLEAR menu, and then
press OK to go to the screen below (or press 6 to go into the MEMORY CLEAR menu ):
Press an up or down Menu button to select the desired sub-menu.
CLEAR ALL SENSORS
CLEAR ALL REMOTES
CLEAR ALL TIMERS
MASTER RESET
Select the desired sub-menu item and then press OK. Press Clear to back out of the
menu. You are asked to confirm, 1. YES, 2 NO. Press 1 to take you back to the HOME
CONTROL screen. Press 2 to stay in the MEMORY CLEAR menu. Note, selecting 4
MASTER RESET immediately takes you back to the HOME CONTROL screen.
Armed
ENTER PIN
12:00 am
Power Battery
Armed
****
12:00 am
Power
Battery
Armed
1. INSTALL
Power
Battery
Armed
6. MEMORY
CLEAR
Power
Battery
25
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away