Review/Cancel Timers - NexxTech 49110000 Owner's Manual

Installation

Review/Cancel Timers

Press either of the Menu up/down buttons. The display then shows ENTER PIN
(Personal Identification Number) in the top line.
The default PIN is 0000, press 0000 on the keypad. This clears the top line and shows *
for each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level.
The display looks like this:
Press an up or down menu button until you reach the SET TIMER menu, and then press
OK to go to the screen below (or press 9 to go into the SET TIMER menu ):
You will see NEW TIMER on the top line. If no timers have yet been entered the up and
down Menu buttons will do nothing. If there are other timers already in memory the up and
down buttons will cycle around them and will always include NEW TIMER in the loop if
there is empty space in the memory.
Armed
ENTER PIN
12:00 am
Power
Battery
Armed
****
12:00 am
Power
Battery
Armed
1. INSTALL
Power
Battery
Armed
9. SET TIMER
Power
Battery
Armed
9. NEW TIMER
Power
Battery
30
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away