NexxTech 49110000 Owner's Manual page 29

Installation
To enter a new timer you must be on the NEW TIMER screen. Press OK. The display
shows UNIT NUMBER on the top line. Using the number keys, enter a valid number (1-16)
and press OK.
For example, you enter 12. The top line displays TIMER 12 ON. The bottom line displays a
colon, :
Enter the desired ON time with the number keys followed by AM or PM in the format shown
below, (or just press OK if you don't want to set an ON time). Press Clear if you enter a
wrong time.
Press OK. The top line displays TIMER 12 OFF. The bottom line displays a colon :
Enter the OFF time as above and press OK, (or just press OK if you don't want to set an
OFF time). Press Clear if you enter a wrong time. The display shows 1. DAILY on the bot-
tom line (top line blank).
Using the up or down Menu buttons you can cycle through 1. DAILY, 2. ONCE ONLY, and
3. RANDOM. Select your choice and press OK. The display again shows NEW TIMER.
The up and down Menu buttons will now cycle through the entered events as shown below.
12ON 12:34am
OFF 12:45pm
Note you can set a total of 12 "timer pairs" i.e. ON-OFF times. If you choose to set an ON
time with no corresponding OFF time for that unit code (or vice versa) it still counts as a
"timer pair." RANDOM varies the time during the programmed hour.
Armed
9. UNIT NUMBER
Power
Battery
Armed
9. TIMER 12 ON
:
Power Battery
Armed
9. TIMER 12 ON
12:34am
Power Battery
Armed
9. TIMER 12 OFF
:
Power
Battery
Armed
1. DAILY
Power Battery
29
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away
Home
Arm
Away