Sub-Menus - NexxTech 49110000 Owner's Manual

Installation
1. INSTALL
2. SET CLOCK
3. PHONE NUMS
4. MESSAGE
5. NEW PIN
6. MEMORY
CLEAR
7. OPTIONS
8. DELAYS
9. SET TIMER
To leave the first level menu press the Clear button. If you are entering numbers (for the
time, etc.), Clear will clear all numbers entered. Otherwise, Clear gives the option of
leaving the menu completely and going back to the HOME CONTROL mode, or staying in
the INSTALL mode.

Sub-menus

Once you've arrived at your desired first level menu and pressed OK, you can select the
sub-menus under that menu item. Alternatively you can go directly to the sub-menu item
by pressing the appropriate number button.
Allows installation/removal of sensors, and/or remotes.
Enter time followed by AM or PM.
Store up to six (16 digit) phone numbers.
1. RECORD (This is your own alarm message)
2. REPLAY (Replays your message).
Enter new 4 digit PIN.
Clear all Sensors, Remotes, Timers, or Master Clear.
Set Chime On/Off, Siren On/Off, Set Housecode or Light Code.
Set Exit, Entry, Dial, and Answer Delays.
Enter unit code, then On and Off time, then Daily, Once or Random.
Direct menu
access numbers
Menu buttons
OK button
PRESS THEN ENTER YOUR PIN. THEN USE
TO STEP THRU MENU ITEMS. THEN PRESS OK
TO SELECT ITEM. OR PRESS NUMBERS BELOW.
- Install Sensors & Remotes
1. INSTALL
2. SET C LOC K - Enter time of day
- Store up to 6 phone numbers
3. PHONE NUMS
- Record or Replay your message
4. MESSAG E
- Change your 4 Digit P.I.N.
5. NEW PIN
6. MEMORY - Sensor, Remote, Timer, Master
C LEAR
- Chime, Siren, H Code, L Code
7. OPTIONS
- Entry, Exit, Dial, Answer delays
8. DELAYS
9. SET TIMER - Set ON/OFF Timers
CLEAR GIVES OPTION TO LEAVE MENU
10
PRESS THEN ENTER YOUR PIN. THEN USE
TO STEP THRU MENU ITEMS. THEN PRESS OK
TO SELECT ITEM. OR PRESS NUMBERS BELOW.
- Install Sensors & Remotes
1. INSTALL
- Enter time of day
2. SET C LOC K
- Store up to 6 phone numbers
3. PHONE NUMS
- Record or Replay your message
4. MESSAG E
- Change your 4 Digit P.I.N.
5. NEW PIN
- Sensor, Remote, Timer, Master
6. MEMORY
C LEAR
- Chime, Siren, H Code, L Code
7. OPTIONS
- Entry, Exit, Dial, Answer delays
8. DELAYS
- Set ON/OFF Timers
9. SET TIMER
CLEAR GIVES OPTION TO LEAVE MENU