Bayer HealthCare CLINITEK 500 Operating Manual page 26

SELECTING YOUR OPTIONS
A. Setup Menu #1
The first Setup menu is displayed; for example:
Set options.
Date: 09-05-98
Time: 10:34 AM
Computer port-OFF
Printer
Touch the key symbol that appears next to the option you
want to change. Each option is described below.
1. Date:
1. a. When the Date key is touched, the display changes
to show the current date and a numeric keypad by
which the date can be changed (the date format and
separator can be changed through Setup Menu #3,
Step D). For example:
Enter Month:
09-05-98
3.4
1. b. Enter the correct date by touching the proper numer-
ic keys, or touch the arrow keys to move the
cursor to the digit that needs to be changed and
enter the correct number. The message will change
as you move from one part of the date to the next,
showing the prompt, for example, "Enter day," then
"Enter year." Be sure to enter the leading "0"
where needed.
1. c. When the date has been entered, touch
sage will be displayed if an invalid date is entered;
be sure the date has been entered in the order
shown on the prompts. If the date is valid, the dis-
play returns to the first Setup menu.
2. Time:
2. a. When the Time key is touched, the display changes
to show the current time (in the selected format)
and the numeric keypad by which the time can be
changed, similar to that displayed for changing the
date. (The time format and separator can be
changed through Setup Menu #3, Step D.)
2. b. Enter the appropriate digits by touching the prop-
er numeric keys and/or touch the arrow keys to
move the cursor to the appropriate digit that needs
to be changed. The message will change as you
move from one part of the time to the next, show-
ing the prompts "Enter hour" and "Enter minutes."
Be sure to enter the leading "0" where needed.
2. c. If the time format is "12 Hour," touch the AM/PM
cycle key to change from AM to PM or vice-versa.
(If the time format is "24 Hour," the AM/PM cycle
key is not active.)
2. d. When the time has been entered, touch
sage will be displayed if an invalid time is entered.
If the time is valid, the display returns to the first
Setup menu.
3. Computer port:
3. Touch the Computer port cycle key to change the selec-
tion between OFF and ON. Depending upon the selec-
tion made, results can be transferred to a computer.
The specifications for the computer port are selected
later in the Setup Routine.
. A mes-
. A mes-
Revised 10/06