Table of Contents
Advertisement
Is the amount remaining in the drum cartridge running low?
●
Check how much the amount remaining in the drum cartridge is left, and replace the drum cartridge as
necessary.
●
Regardless of the amount remaining in the drum cartridge, the drum cartridge may reach the end of its
lifetime depending on the use environment or the deterioration of materials inside the drum cartridge.
Replacing the Drum Cartridge(P. 246)
Spots Appear
Have you cleaned the fixing unit?
●
Clean the fixing unit.
Cleaning the Fixing Assembly(P. 242)
Reverse Side of Paper is Smudged
Have you loaded paper that is smaller than the size of the print data?
●
Check to make sure that the paper size matches the size of the print data.
Have you cleaned the fixing unit?
●
Clean the fixing unit.
Cleaning the Fixing Assembly(P. 242)
Do smudges appear on 2-sided printed paper?
●
The back side of the paper may become smudged during 2-sided printing. Setting <Special Printing Mode
R> to <On> may solve the problem.
<Special Processing>(P. 225)
Troubleshooting
279
Advertisement
Table of Contents
