Configuring Ethernet Settings - Canon 2438C006 User Manual

Configuring Ethernet Settings

1
Select <Menu> in the Home screen.
2
Select <Network Settings>.
● If the screen for entering a PIN appears, enter the correct PIN.
3
Select <Ethernet Driver Settings>
4
Select whether to configure Ethernet settings automatically or manually.
● If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode
and the type that can be used.
Configuring Ethernet settings automatically
Select <On> in <Auto Detect>.
Configuring Ethernet settings manually
1
Configure a setting to disable Auto Detect.
Select <Off> in <Auto Detect>.
2
<Communication Mode>
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a
networking device using half duplex.
<Full Duplex>
Setting Up
Ethernet is a standard for communicating data in a local area network (LAN). You can set
the communication mode and the Ethernet type. In general, the machine can be used
without changing the defaults (
change these settings to suit your network environment.
select the communication mode.
<Ethernet Driver Settings>(P. 204) ), but you can
Home Screen(P. 88)
Setting the System Manager PIN(P. 145)
<Auto Detect>.
58
23FJ-066